NASA SP-441: VIKING ORBITER VIEWS OF MARS

- CRATERS -

 

large crater on Mars

 

[73] IMPACT CRATERS, which occur almost everywhere on the Martian surface, are significant because the number of impact craters per unit area gives an indication of the relative ages of different parts of the surface. They also provide clues to the properties of the near-surface materials and record the effects of various processes, such as wind action, that modify the surface. The density of impact craters varies from the heavily cratered southern hemisphere to very sparsely cratered regions like the polar dune fields and laminated terrain.

Most surfaces photographed by the Viking orbiters have crater densities in excess of typical lunar mare surfaces. This condition suggests that most of the Martian surface is probably billions of years old. The implication is that resurfacing, such as by volcanic processes or wind action, is extremely slow in most places compared with Earth. Crater densities low enough to suggest significantly higher rates of resurfacing are found only in the polar regions, around some volcanoes, and very locally in other areas. In the 40° to 60° latitude belts, particularly, significant surface modification has occurred since the presently observed crater population formed. Craters in these areas have apparently been modified by repeated burial and stripping of debris layers. The era in which this activity occurred, and whether or not it is continuing, in unknown.

The Viking orbiter pictures revealed some unique characteristics of Martian impact craters. The ejecta pattern around most fresh Martian impact craters is distinctively different from that around lunar and mercurian craters. On the Moon and on Mercury, the ejecta typically have a coarse, disordered texture close to the rim. Farther out, the texture becomes finer and, with increasing radial distance, grades imperceptibly into dense fields of secondary craters and rays. Most Martian craters have quite a different ejecta pattern. The ejecta commonly appear to consist of several layers, with the outer edge of each marked by a low ridge or escarpment. Features on the ejecta surfaces include closely space radial striae and concentric grooves, ridges, and scarps, especially toward the outer margin. These unique Martian features were seen vaguely in the Mariner 9 pictures and tentatively attributed to wind action.

Viking pictures show that many of the peculiar characteristics of Martian craters are primary emplacement features not due to wind. The fresher the crater appears, the better preserved are the striae, ramparts, and concentric features. Very small secondary craters indicate that the crater has undergone very little modification since its formation. Martian craters look different from those on the Moon and Mercury because the process of ejecta emplacement is different. The final stage of emplacement of ejecta on Mars [74] is thought to be an outward moving debris flow instead of the simple ballistic deposition that occurs on the Moon and Mercury. Why the emplacement process is so different on Mars in not understood; possibly encountering water at depth or the melting of large amounts of ground ice by the impact results in fluid, mud-like ejecta. The presence of an atmosphere may also have an effect on the manner in which the ejecta are emplaced. These characteristics of the craters indicate that the properties of near-surface materials on Mars are quite different from those on the Moon and Mercury.

Although some features of Martian craters formerly attributed to wind action are now believed to be primary, modification by wind is still significant in many areas. In the 40° to 60°N latitude band, numerous craters that have been termed pedestal craters occur in the center of a roughly circular platform many crater-diameter across. The pedestals have been attributed to the partial stripping of a formerly continuous debris blanket by the wind, with the result that most craters are surrounded by a platform composed of remnants of the debris blanket. This feature is especially striking where fields of secondary craters occur, and results in arrays of low hills with central craters that simulate a field of volcanic cones. In other areas, repeated burial and stripping have led to bizarre formations, such as ejecta surfaces at a lower elevation than the surrounding terrain.

 


 

[75] Rampart Crater in Chryse Planitia. The outer edge of the inner ejecta layer of Belz Crater is demarcated by a low ridge or rampart. On the surface of the ejecta layer are faint radial striations and concentric ridges and grooves. Outside the rampart, the topography is similar to the distal parts of lunar and mercurian ejecta, with numerous isolated hummocks and indistinct radial ridges. [10A54, 56; 22°N, 43°W]

Rampart Crater in Chryse
         Planitia

Layered Ejecta around the Crater Tarsus. Each ejecta layer seen here has an outer ridge or escarpment. The upper layer appears to have flowed over and transected the outer margin of the lower layers. At the arrow, ejecta have flowed around a low obstacle. [10A66, 68, 70, 92-98; 23°N, 40°W]

Layered Ejecta around the Crater
         Tarsus


[76]

Yuty Crater

Yuty Crater. This crater has several ejecta layers, each complexly lobed and each with an outer rampart. Although buried by Yuty ejecta, a pre-Yuty crater close to the rim is clearly visible, indicating that the ejecta deposit is thin. [3A07; 22°N, 34°W]


 

[77] Arandas Crater. The outer layer of ejecta has flowed over the surrounding fractured plains. The two arrows indicate where an inner ejecta layer has flowed around pre-existing craters. Numerous low ridges occur on the inner ejecta layer close to and parallel to its outer margin. [32A28-31, 9A42; 43°N, 14°W]

Arandas Crater


 

[78]

Detail of Arandas Crater
         Ejecta

Detail of Arandas Crater Ejecta. The fractures of the underlying plains at Arandas' location are clearly visible through the ejecta, even close to the rim, showing that the ejecta are very thin. On the ejecta surface is a fine radial pattern. [32A28; 43°N, 14°W]


 

[79] Poona Crater. This crater is close to Kasei Vallis, the edge of which is marked by an escarpment in the northwest corner of the image. The ejecta have a marked radial pattern and no outer rampart. [22A54; 24°N, 52°W]

Poona Crater


[80]

Pedestal Craters

Pedestal Craters. Almost all the craters in this area are situated within a pedestal or platform that stands above the surrounding plains. The diameter of the platform decreases in size as the crater diameter decreases, so that small craters may occur atop low domes. The mode of formation for the pedestal craters is poorly understood. The observed configuration may be partly primary and partly the result of selective stripping of a former layer of debris that covered the surface, with the layer now remaining only around craters. [43A04; 45°N, 353°W]

Pedestal craters. The ejecta deposit around the crater in the left half of the frame still retains its multilayered character and faint radial surface texture. Other craters have well-developed pedestals, but primary textures are less well preserved. A cluster of craters at the top of the frame strongly resembles a group of volcanic cones but is probably part of the impact crater continuum. [60A53; 48°N, 349°W]

Pedestal Craters


[81]

Craters with Irregular Ejecta
         Blanket

Craters with Irregular Ejecta Blanket. Some craters in this picture have well-developed pedestals; others are surrounded by bright ejecta but no well-defined outer escarpment. The large crater in the bottom half of the frame has a slightly irregular ejecta pattern with elongate lobes extending out over the surrounding fractured plains. [10B52; 45°N, 259°W]


[82]

Lowell Crater

Lowell Crater. As on the Moon and Mercury, very large impacts form multiringed basins such as this 210-km diameter crater. Radial lines of secondary craters are clearly visible outside the more disordered terrain close to the rim crest, despite partial dissection by small channels. The smooth feature in the center of the basin may be a low-lying cloud. To the north of Lowell, near the center of the picture is Slipher Crater. [34A17-20; 52°S, 81°W]


[83]

Hamelin Crater

Hamelin Crater. Hamelin Crater, only 90 km northeast of the original landing site selected for Viking Lander 1 in Chryse Planitia, shows the raised edge or rampart around the ejecta blanket that is characteristic of many craters in this area. [77/08/10/180701; 20°N, 33°W]


PreviousIndex Next